A grease fitting, grease nipple, Zerk fitting, grease zerk, or Alemite fitting is a metal fitting used in mechanical systems to feed lubricants, usually...
9 KB (1,289 words) - 08:50, 14 August 2023
to a specific point, usually from a grease cartridge to a grease fitting or 'nipple'. The channels behind the grease nipple lead to where the lubrication...
2 KB (316 words) - 16:10, 9 March 2024
Grease 2 is a 1982 American musical romantic comedy film, and a standalone sequel to the 1978 film Grease, adapted from the 1971 musical of the same name...
36 KB (4,228 words) - 04:30, 9 August 2024
A grease trap (also known as grease interceptor, grease recovery device, grease capsule and grease converter) is a plumbing device (a type of trap) designed...
11 KB (1,540 words) - 15:23, 18 March 2024
built into them. If the idler arm is fitted with grease fittings, these should be lubricated with a grease gun at each oil change. "What is an idler arm...
1 KB (130 words) - 15:46, 18 December 2023
use only a special grease or nothing at all (if the mating surfaces are sufficiently precisely formed). Although flange fittings are bulky, they perform...
56 KB (6,854 words) - 11:43, 5 August 2024
Lincoln Industrial (section The Lever Grease Gun)
"surface check" grease fitting that would help to prevent dirt from entering through a fitting. Lincoln had developed many advances in fittings including the...
22 KB (2,911 words) - 07:46, 28 June 2024
A compression fitting is a fitting used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. In instances where...
8 KB (1,260 words) - 14:14, 26 May 2024
them effectively. Nonsealed bearings often have a grease fitting, for periodic lubrication with a grease gun, or an oil cup for periodic filling with oil...
45 KB (5,001 words) - 14:58, 19 August 2024
they are "lubed for life". Formerly most ball joints had grease fitting (sometimes called a grease zerk) and were designed for periodic addition of a lubricant...
16 KB (2,125 words) - 21:47, 30 May 2024