• Thumbnail for RepRap
    many RepRap printer designs including: Prusa i3 Hangprinter RepRap Fisher RepRap Snappy RepRap Morgan RepRap Ormerod RepRap Darwin RepRap Mendel RepRap was...
    26 KB (2,644 words) - 11:44, 21 August 2024
  • Thumbnail for Fused filament fabrication
    Computerworld New Zealand. 2008-04-07. Retrieved 2013-10-30. "First RepRapped circuit". blog.reprap.org. April 19, 2009. Bhanoo, Sindya N. (9 December 2013). "An...
    46 KB (4,645 words) - 02:11, 29 July 2024
  • Thumbnail for RepRap Snappy
    24 February 2016. Retrieved 26 July 2016. "RepRap - RepRapWiki". reprap.org. Retrieved 26 July 2016. "RepRap Snappy is the Most 3D Printable 3D Printer...
    3 KB (266 words) - 18:49, 14 November 2023
  • Prusa i3 (category RepRap project)
    Pololu Shield - RepRap". reprap.org. Retrieved May 10, 2023. "Rambo - RepRap". reprap.org. Retrieved May 10, 2023. "EinsyRambo - RepRap". reprap.org. Retrieved...
    37 KB (3,936 words) - 20:23, 4 July 2024
  • Thumbnail for RepRap Ormerod
    2016. "New RepRapPro Ormerod 2 Kits Are Now Available for Purchase". 25 September 2014. Retrieved 13 July 2016. RepRap Ormerod page on RepRap.org Open Source...
    2 KB (183 words) - 14:03, 14 November 2023
  • Thumbnail for RepRap Morgan
    The RepRap Morgan is an open-source fused deposition modeling 3D printer. The Morgan is part of the RepRap project and has an unusual SCARA arm design...
    4 KB (334 words) - 16:38, 5 July 2024
  • Thumbnail for 3D printing processes
    academic and hacker communities. RepRap Project is one of the longest running projects in the desktop category. The RepRap project aims to produce a free...
    74 KB (8,099 words) - 21:43, 22 August 2024
  • Thumbnail for 3D printing
    005. hdl:20.500.11937/7988. ISSNĀ 0926-5805. S2CIDĀ 54037889. "About - RepRap". reprap.org. Archived from the original on 27 December 2023. Retrieved 27 November...
    203 KB (21,164 words) - 19:54, 26 August 2024
  • printer filament. In following the RepRap tradition there are recyclebot designs that use mostly 3-D printable parts. RepRap 3D printers have been shown to...
    12 KB (1,189 words) - 16:30, 21 July 2024
  • Marlin is open source firmware originally designed for RepRap project FDM (fused deposition modeling) 3D printers using the Arduino platform. Once the...
    16 KB (1,361 words) - 21:22, 28 August 2024