Soldering (US: /ˈsɒdərɪŋ/; UK: /ˈsoʊldərɪŋ/) is a process of joining two metal surfaces together using a filler metal called solder. The soldering process...

Solder (UK: /ˈsɒldə, ˈsəʊldə/; NA: /ˈsɒdər/) is a fusible metal alloy used to create a permanent bond between metal workpieces. Solder is melted in order...

Reflow soldering is a process in which a solder paste (a sticky mixture of powdered solder and flux) is used to temporarily attach anywhere from one to...

The solderability of a substrate is a measure of the ease with which a soldered joint can be made to that material. Good solderability requires wetting...

Solder is a metallic material that is used to connect metal workpieces. The choice of specific solder alloys depends on their melting point, chemical...

A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. A soldering...

Solder paste is used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. It is also possible to solder...

soldering is a bulk soldering process used for the manufacturing of printed circuit boards. The circuit board is passed over a pan of molten solder in...

of the joint by the soldering tool or molten solder. In high-temperature metal joining processes (welding, brazing and soldering), fluxes are nearly inert...

Solder mask, solder stop mask or solder resist is a thin lacquer-like layer of polymer that is usually applied to the copper traces of a printed circuit...