The step response of a system in a given initial state consists of the time evolution of its outputs when its control inputs are Heaviside step functions...

the response. In the time domain, the usual choice to explore the time response is through the step response to a step input, or the impulse response to...

of the system. The impulse response and step response are transient responses to a specific input (an impulse and a step, respectively). In electrical...

overshot. Turning to step response, the step response is the integral of the impulse response; formally, the value of the step response at time a is the integral...

Frequency response Gibbs phenomenon Küssner effect Linear response function LTI system theory Point spread function Pre-echo Step response System analysis...

concept behind some test signals, such as those used to determine the step response of a dynamical system. The rectangular function, the normalized boxcar...

on the response time of the system. If the system can be taken offline, the best tuning method often involves subjecting the system to a step change in...

oscillate, and to control overshoot and ringing in the amplifier's step response. It is also used extensively to improve the bandwidth of single pole...

measure the charging time duration to reach that voltage threshold. This step response measurement can be continually repeated (e.g. by using a square wave)...

}}}u(t)\,,} where u(t) is the Heaviside step function and τ = RC is the time constant. Similarly, the impulse response for the resistor voltage is h R ( t...