Lüders bands are a type of slip band or stretcher-strain mark which are formed due to localized bands of plastic deformation in metals experiencing tensile...
6 KB (635 words) - 00:21, 8 May 2024
and propagation of Lüders bands. Explicitly, heterogeneous plastic deformation forms bands at the upper yield strength and these bands carrying with deformation...
16 KB (2,190 words) - 15:46, 30 June 2024
repeat. This process's most well-known macroscopic manifestations are Lüders bands and the Portevin–Le Chatelier effect. However, the mechanism is known...
9 KB (1,252 words) - 20:41, 28 December 2021
Lüders bands from forming in later processing). It locks dislocations at the surface and thereby reduces the possibility of formation of Lüders bands...
43 KB (5,822 words) - 14:03, 20 July 2024
for a three-dimensional slip band or inclined crack, the 𝐽3 terms cannot be neglected. Deformation twinning Lüders band Koko, Abdalrhaman; Elmukashfi...
51 KB (5,228 words) - 18:51, 16 May 2024
voltage-controlled oscillators) and have a narrow bandwidth, thus reducing out of band EMI. Overloading – If a strain gauge is loaded beyond its design limit (measured...
30 KB (3,987 words) - 21:33, 8 May 2024
value. If a metal is only stressed to the upper yield point, and beyond, Lüders bands can develop. Yielded structures have a lower stiffness, leading to increased...
22 KB (2,756 words) - 08:14, 19 June 2024
point between the upper and lower yield point then the surface develops Lüder bands. Low-carbon steels contain less carbon than other steels and are easier...
21 KB (2,637 words) - 09:21, 28 May 2024
aspects of inhomogeneous hot deformation in as-cast CuNi25 alloy" (PDF). Indian Journal of Engineering & Materials Sciences. 22: 389–398. Lüders band...
14 KB (1,738 words) - 08:11, 17 June 2023