Filament winding is a fabrication technique mainly used for manufacturing open (cylinders) or closed end structures (pressure vessels or tanks). This...

the secondary winding. This varying flux at the secondary winding induces a varying electromotive force or voltage in the secondary winding. This electromagnetic...

full wind, its force is stronger than the bridle spring, and further winding pulls the bridle loose from the notches and it simply slides along the wall...

on its output side. However, push–pull more commonly refers to a two-switch topology with a split primary winding. In any case, the output is then rectified...

A push–pull amplifier is a type of electronic circuit that uses a pair of active devices that alternately supply current to, or absorb current from, a...

obtained by electromagnetic induction from the magnetic field of the stator winding. An induction motor therefore needs no electrical connections to the rotor...

A pullback motor (also pull back, pull back and go or pull-back) is a simple clockwork motor used in toy cars. A patent for them was granted to Bertrand...

The main production process used by the company are pultrusion and its pull-winding variant. The production site is located in Gaillan, France. The company...

In electrical engineering, coil winding is the manufacture of electromagnetic coils. Coils are used as components of circuits, and to provide the magnetic...

particular winding is closed and that the phase is working. Bipolar motors have a pair of single winding connections per phase. The current in a winding needs...