the joint and does generate some additional vibration at higher speeds. The Tracta joint works on the principle of the double tongue and groove joint. It...

used a front-wheel-drive system featuring Grégoire's patented Tracta constant-velocity joint and sliding pillar independent front suspension and a live axle...

vehicles in two ways. The first way was in developing and promoting the Tracta joint (designed by his friend Pierre Fenaille), which was, until manufacturing...

France, Jean-Albert Grégoire and Pierre Fenaille developed the Tracta constant-velocity joint in 1926. In October 1928 a sensation at the 22nd Paris Motor...

Full Floating (hypoid), ratio 5.83:1 Front Universal Drive New Process (Tracta joint) Fuel tank 24 U.S. gallons (91 L; 20 imp gal) tank (vented through engine...

transverse links and single coil springs, the wheels driven by Tracta constant-velocity joints, but the Ferret benefited from epicyclic reduction gears reducing...

nyavalyáinak okairól, fészkeiről s azoknak orvoslásának módgyáról való tracta., ("Pax corporis, i.e. a teaching of the causes, cources and the methods...

Grégoire’s small Tracta company had been very successful at Le Mans with its reliable front-wheel drive and patented Universal joint system. The works...

would reside on a conventional ladder-type chassis. Bendix "Tracta" type constant velocity joints were fitted at all wheel stations. All transmission assemblies...

the new Rolls-Royce B40 engine, all-independent suspension based on Tracta joints and a 24V electrical system with a two-speed high-capacity generator...