MIL-STD-1553 is a military standard published by the United States Department of Defense that defines the mechanical, electrical, and functional characteristics...

defense standard, often called a military standard, "MIL-STD", "MIL-SPEC", or (informally) "MilSpecs", is used to help achieve standardization objectives...

an emergency. There are five main groups of MIL-STD-1760 signals: MIL-STD-704 power connections MIL-STD-1553 data communications interface High and low...

Terminating resistor values of 78.7 ohms 2 watt 1% are used on the MIL-STD-1553 bus. At the two ends of the bus, resistors connect between the positive...

message is a command byte, and following frames are associated data. MIL-STD-1553 specifies that the data bus should have characteristic impedance between...

type. These connectors are also used for connecting Triaxial cable. Since MIL-STD-1553B does not specify the type of connector to be employed in data bus...

MiG-35's onboard equipment has been left open intentionally using the MIL-STD-1553 bus. Maximum payload is 6.5 tons. The MiG-35 is powered by two FADEC...

MIL-STD-1397 standard was issued by the United States Department of Defense (DoD) to define "the requirements for the physical, functional and electrical...

eliminating the need to transmit clocking data. ARINC 429 is an alternative to MIL-STD-1553. The ARINC 429 unit of transmission is a fixed-length 32-bit frame, which...

probability of kill and a reliable fuze. It will be compatible with MIL-STD-1553 and MIL-STD-1760 and is designed for use with the LAU-129 guided missile launcher...