An injection pump is the device that pumps fuel into the cylinders of a diesel engine. Traditionally, the injection pump was driven indirectly from the...
6 KB (743 words) - 10:38, 26 May 2024
injection has been a known technology since the 1960s, but has long been considered inferior to carburettors, because it requires an injection pump,...
25 KB (3,220 words) - 13:07, 5 August 2024
mechanical injection systems used relatively sophisticated helix-controlled injection pump(s) that both metered fuel and created injection pressure. Since...
33 KB (3,807 words) - 17:37, 9 July 2024
controlled inline injection pump (ERE) except in the W124 where it uses a Bosch mechanically governed inline injection pump (Bosch M pump with RSF governor)...
4 KB (292 words) - 11:58, 7 May 2024
lower pressure manifold injection systems) or high-pressure mechanical pumps mounted on the engine (for high-pressure direct injection systems). Some engines...
6 KB (787 words) - 16:40, 23 April 2024
unburned hydrocarbons. Pumped air injection systems use a vane pump called the air pump, AIR pump, or colloquially "smog pump" turned by the engine via...
6 KB (752 words) - 10:47, 18 April 2024
systems, injector, and VE rotary pump and P7100 inline injection pumps. Some early 6BTs were supplied with CAV rotary pumps instead, before the Bosch system...
21 KB (2,263 words) - 19:31, 18 July 2024
1992–1993 model years used a 6.5-specific Stanadyne DB-2 mechanical injection pump. GM replaced the DB-2 with the electronic throttle DS-4 in 1994–2000...
12 KB (1,551 words) - 19:13, 26 February 2024
Diesel engine (redirect from Start of injection)
that the injection pump can pump the fuel to the injection nozzles without causing damage to itself or corrosion of the fuel line. At injection, the fuel...
152 KB (16,601 words) - 06:19, 8 August 2024
engine management low-pressure fuel lift pump, underfloor fuel cooler; Pumpe Düse (PD) high-pressure direct injection (with three camshaft pressurised solenoid...
140 KB (14,755 words) - 00:30, 10 August 2024