type. Additional letter suffixes indicate minor variations. For example, RJ11, RJ14, and RJ25 are the most commonly used interfaces for telephone connections...

plug has become by far the most common type. A connection standard, such as RJ11, specifies not only the physical aspects of an electrical connector, but...

connector. Similarly, various six-position modular connectors may be called RJ11. Likewise, the 4P4C connector is sometimes called RJ9 or RJ22 though no such...

to this pin, the mode is left unchanged. An industry standard for using RJ11 sockets with an ICSP programmer is supported by Microchip. The illustration...

specified in BS 6305. They are similar to modular connectors (as used in RJ11), but have a side-mounted hook, rather than a bottom-mounted one, and are...

equipment (e.g. with RJ11), and 6P4C plugs used for two-line phones without power (e.g. with RJ14) and single-line phones with power (again RJ11), telephone connections...

in Sweden and older Póstur og Sími (now Síminn) installations in Iceland (RJ11 and a data/voice standard using an 8P8C modular connector are used in more...

August 12, 1994 La Silla E. W. Elst FLO 5.0 km MPC · JPL 10152 Ukichiro 1994 RJ11 Ukichiro September 11, 1994 Kiyosato S. Otomo V 4.6 km MPC · JPL 10153 Goldman...

computer,[citation needed] and an RJ11 adapter cable to allow voice and data calls to be made over POTS landlines. The RJ11 adapter helped users reduce expensive...

until the 1990s. As of 2004, telephone installations in South Africa use RJ11 plugs (which are sometimes referred to in South Africa as Venus plugs), but...