10BASE2 (also known as cheapernet, thin Ethernet, thinnet, and thinwire) is a variant of Ethernet that uses thin coaxial cable terminated with BNC connectors...
9 KB (1,147 words) - 16:39, 5 October 2024
thick coaxial cable as a shared medium. This was largely superseded by 10BASE2, which used a thinner and more flexible cable that was both cheaper and...
58 KB (6,363 words) - 08:18, 26 September 2024
one Type C Mini-Centronics 36-pin parallel port. 600n – 10/100BASE-TX/10BASE2/LocalTalk (J3110A, J3111A, J3112A, J3113A) (Discontinued) 610n – Ethernet/Fast...
20 KB (1,658 words) - 13:46, 9 October 2024
Ethernet systems usually were 10BASE2, also known as thinnet. Apple's system is called FriendlyNet. A FriendlyNet 10BASE2 system does not use BNC T-connectors...
10 KB (1,047 words) - 15:20, 2 October 2024
Attachment Unit Interface (AUI) connector to allow connection to legacy 10BASE2 or 10BASE5 network segments. Hubs are now largely obsolete, having been...
11 KB (1,396 words) - 19:38, 4 September 2024
120 ohm resistor. Dummy loads are commonly used in HF to EHF circuits. 10BASE2 networks absolutely must have proper termination with a 50 ohm BNC terminator...
8 KB (848 words) - 23:00, 13 September 2024
detection are media dependent. On a shared, electrical bus such as 10BASE5 or 10BASE2, collisions can be detected by comparing transmitted data with received...
14 KB (1,956 words) - 16:50, 6 September 2024
tied together with 4 repeaters, with up to 3 mixing segments (10BASE5, 10BASE2, or 10BASE-FP). Link segments can be 10BASE-T, 10BASE-FL or 10BASE-FB....
7 KB (881 words) - 13:54, 4 October 2024
early computer networks, including ARCnet, the IBM PC Network, and the 10BASE2 variant of Ethernet. The BNC connector is used for signal connections such...
15 KB (1,713 words) - 13:36, 19 August 2024
400 MB, 660 MB, 1.4 GB or 2.8 GB SCSI drive Network interface: 10BASE-T and 10BASE2 Ethernet Expansion: four NeXTbus slots (mainboard uses one slot) Size (H...
5 KB (348 words) - 01:05, 26 April 2024