Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark...
25 KB (3,220 words) - 13:07, 5 August 2024
A fuel injection system that uses external mixture formation is called a manifold injection system. There exist two types of manifold injection systems:...
33 KB (3,807 words) - 23:15, 16 September 2024
chamber. This is distinct from manifold injection systems, which inject fuel into the intake manifold (inlet manifold). The use of GDI can help increase...
43 KB (5,011 words) - 15:26, 21 May 2024
Stroke (mm): 85 × 79.2 Compression ratio: 9.4:1 Multi-point intake manifold injection Turbocharger model: TD04 Peak power: 120 kW (161 hp; 163 PS) Peak...
31 KB (3,777 words) - 11:52, 29 July 2024
Jetronic (category Fuel injection systems)
Jetronic is a trade name of a manifold injection technology for automotive petrol engines, developed and marketed by Robert Bosch GmbH from the 1960s onwards...
13 KB (1,603 words) - 22:44, 10 September 2024
lower pressure manifold injection systems) or high-pressure mechanical pumps mounted on the engine (for high-pressure direct injection systems). Some...
6 KB (787 words) - 16:40, 23 April 2024
Diesel engine (redirect from Start of injection)
in a carburetor, or a fuel injector in a manifold injection system atomizing fuel into the intake manifold or intake runners as in a petrol engine)....
153 KB (16,605 words) - 19:12, 29 August 2024
primary function of the intake manifold is to evenly distribute the combustion mixture (or just air in a direct injection engine) to each intake port in...
17 KB (2,315 words) - 15:01, 4 February 2024
Bendix Electrojector (category Fuel injection systems)
The Bendix Electrojector is an electronically controlled manifold injection (EFI) system developed and made by Bendix Corporation. In 1957, American Motors...
7 KB (768 words) - 07:14, 19 June 2023
Technology Motronic for manifold injection Bosch Automotive Technology Electronic throttle control (ETC/EGAS) for manifold injection Hutton, Ray (1 September...
36 KB (4,078 words) - 19:10, 30 July 2024