ToneBurst/MiniDiSEqC techniques. DiSEqC is also compatible with the actuators used to rotate large C band dishes if used with a DiSEqC positioner. DiSEqC uses...

central alignment with the broadcasting satellite, but DiSEqC switches are faster than DiSEqC motors as no physical movement is required.[citation needed]...

The user selects the LNB type, local oscillator frequency, appropriate DiSEqC switch port, and motor configuration. If all the settings are correct for...

Satellites Automatic Location System (USALS), also known (unofficially) as DiSEqC 1.3, Go X or Go to XX is a satellite dish motor protocol that automatically...

bandwidth of a single transponder on the satellite) selected according to a DiSEqC-compliant command from the receiver, to output at a fixed frequency in the...

automatically addressed with any DiSEqC 1.0 or higher receiver. In some cases, they can also be addressed with ToneBurst/MiniDiSEqC. However, they are only available...

receive a specific "channel". This is handled by the receiver using the DiSEqC protocol to control the LNB mode. If several satellite receivers are to...

satellites at 28° East will require a separate feed and a DiSEqC or Multiswitch with a Diseqc compatible receiver. 2rn state that a dish of 1 metre (40")...

the Flex connector is poorly installed. F connectors attached to a 4-way DiSEqC switch. A visual collection of standard and right-angle coaxial F connectors...

parameters such as the signal source (typically the satellite number in a DiSEqC switch), frequency, polarisation, Modulation system and type, the wanted...