DCB (Digital Control Bus, Digital Connection Bus or Digital Communication Bus in some sources) was a proprietary data interchange interface by Roland Corporation...

Digital Command Control (DCC) is a standard for a system for the digital operation of model railways that permits locomotives on the same electrical section...

Direct digital control is the automated control of a condition or process by a digital device (computer). Direct digital control takes a centralized network-oriented...

decoder Bus contention Bus error Bus mastering Communication endpoint Control bus Crossbar switch Memory address Front-side bus (FSB) External Bus Interface...

almost invariably serial—such as PS/2 port, Apple Desktop Bus and USB. The cables that carry digital video are also mostly serial—such as coax cable plugged...

area network (CAN) is a vehicle bus standard designed to enable efficient communication primarily between electronic control units (ECUs). Originally developed...

output from the bus and allows another device to access the bus. Tri-state buffers can be implemented using gates, flip-flops, or other digital logic circuits...

single-wire bidirectional serial bus that is based on the CENELEC standard AV.link protocol to perform remote control functions. CEC wiring is mandatory...

standards to synchronize instruments, such as CV/gate, DIN sync and Digital Control Bus (DCB). Ikutaro Kakehashi, the president of Roland, felt the lack...

Interface Bus) and generically as GPIB (General Purpose Interface Bus), is a short-range digital communications 8-bit parallel multi-master interface bus specification...