of removing analytes from the adsorbent by running a solvent, called an "eluent", past the adsorbent–analyte complex. As the solvent molecules "elute",...

amount of eluent to run the chromatography. The eluent has also been chosen so that the different compounds can be separated effectively. The eluent is optimized...

The eluent exits the gas chromatography column (A) and enters the FID detector’s oven (B). The oven is needed to make sure that as soon as the eluent exits...

multi-component mixture takes place in the column. The constant supply of fresh eluent to the column is accomplished by the use of a pump. Since most analytes...

approximate molecular weight of a compound. The shape and size of the compound (eluent) determine how the compound interacts with the gel (stationary phase). To...

eluted with a solvent or solvent mixture known as the mobile phase (or eluent). This solvent then moves up the plate via capillary action. As with all...

additional step, in which the stationary phase is rinsed with an appropriate eluent. It is possible to have an incomplete recovery of the analytes by SPE caused...

Analyte molecules partition between a liquid stationary phase and the eluent. Just as in hydrophilic interaction chromatography (HILIC; a sub-technique...

(stationary phase), the other (the mobile phase) moving in a definite direction. Eluent (sometimes spelled eluant) – the solvent or solvent fixure used in elution...

chromatography uses a stationary phase which is filled into an annular gap. The eluent is continuously fed across the whole bed interface also the feed is continuously...