7079 aluminium alloy
7079 aluminium alloy (UNS designation A97079) is a high strength, heat treatable wrought aluminium alloy used in the aircraft industry. Age-hardening heat treatment enhances the characteristics of AL 7079, eliminating variations in characteristics seen in Aluminium 7075.[1]
Chemical composition
[edit]Element | Zn | Mg | Cu | Fe | Si | Mn | Cr | Ti | Remainder (each) | Remainder (total) | Al [2] |
---|---|---|---|---|---|---|---|---|---|---|---|
minimum | 3.8 | 2.9 | .4 | 0.00 | 0.00 | .1 | .1 | 0.00 | 0.00 | 0.00 | Remainder |
maximum | 4.8 | 3.7 | .8 | .4 | .3 | .3 | .25 | .1 | .5 | .15 | Remainder |
Heat treatment for aluminium 7079
[edit]- Solution treatment
- Aging treatment
- Annealing treatment
Machinability
[edit]- Alloy 7079 T-6 provides qualities comparable to alloy 7075-T6
- -F condition provides acceptable results
- Improved machinability compared to fabricated and annealed tempers
Workability
[edit]- Can be formed similar to 7075
- Annealing provides superior formability and noticeable decline in workability following solution heat treatment
- Form in “as-quenched” condition for best results
Applications
[edit]- Mobile industry equipment
- Aircraft parts, including wing panels and bulkhead assemblies
- Hydraulic units
- Highly stressed parts
References
[edit]- ^ "Steelforge".
- ^ "Azom". Azom. 8 May 2013. Retrieved 25 August 2015.
- ^ a b c "Aluminum 7079".
- ^ "Steelforge". Steelforge.