Chloroacetone
![]() | |
![]() | |
Names | |
---|---|
Preferred IUPAC name 1-Chloropropan-2-one | |
Other names Acetonyl chloride, chloropropanone, 1-chloro-2-propanone, monochloroacetone, 1-chloro-2-ketopropane, 1-chloro-2-oxypropane UN 1695 | |
Identifiers | |
3D model (JSmol) | |
605369 | |
ChEBI | |
ChemSpider | |
ECHA InfoCard | 100.001.056 |
EC Number |
|
PubChem CID | |
RTECS number |
|
UNII | |
CompTox Dashboard (EPA) | |
| |
| |
Properties | |
C3H5ClO | |
Molar mass | 92.52 g·mol−1 |
Appearance | Colorless liquid, oxidizes to amber |
Density | 1.123 g/cm3 |
Melting point | −44.5 °C (−48.1 °F; 228.7 K) |
Boiling point | 119 °C (246 °F; 392 K) |
10 g/100 mL at 20 °C | |
Solubility | miscible with alcohol, ether, chloroform |
Vapor pressure | 1.5 kPa |
-50.9·10−6 cm3/mol | |
2.36 | |
Hazards | |
Flash point | 35 °C (95 °F; 308 K) |
610 °C (1,130 °F; 883 K) | |
Explosive limits | 3.4% - ?[1] |
Lethal dose or concentration (LD, LC): | |
LD50 (median dose) | 100 mg/kg (rats, oral)[2] |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). |
Chloroacetone is a chemical compound with the formula CH3COCH2Cl. At STP it is a colorless liquid with a pungent odor.[3] On exposure to light, it turns to a dark yellow-amber color.[4] It was used as a tear gas in World War I.[5]
Synthesis
[edit]Chloroacetone may be synthesized from the reaction between chlorine and diketene, or by the chlorination of acetone.
Applications
[edit]Chloroacetone is used to make dye couplers for colour photography, and is an intermediate in chemical manufacturing.[2] It is also used in the Feist-Benary synthesis of furans.[6]
- Reaction of phenoxide with chloroacetone gives phenoxyacetone,[7] which is used to make a wide variety of different pharmaceuticals. A catalytic amount of potassium iodide is also necessary to facilitate a Finkelstein reaction.
Purification
[edit]Chloroacetone purchased from commercial suppliers contains 5% impurities including mesityl oxide, which is not removed by distillation. Mesityl oxide can be oxidized using acidified KMnO4 to form a diol (followed by separation with ether), which is removed on subsequent distillation.[8]
Transportation regulations
[edit]Transportation of unstabilized chloroacetone has been banned in the United States by the US Department of Transportation. Stabilized chloroacetone is in hazard class 6.1 (Poison Inhalation Hazard). Its UN number is 1695.
See also
[edit]References
[edit]- ^ "ICSC:NENG0760 International Chemical Safety Cards (WHO/IPCS/ILO) CDC/NIOSH". Center for Disease Control. 2006-10-11. Retrieved 2009-04-17.
- ^ a b Hathaway, Gloria J.; Proctor, Nick H. (2004). Proctor and Hughes' Chemical Hazards of the Workplace (5 ed.). Wiley-Interscience. pp. 143–144. ISBN 978-0-471-26883-3. Retrieved 2009-04-16.
- ^ "Occupational Safety and Health Guideline for Chloroacetone". U.S. Department of Labor - Occupational Safety & Health Administration. Archived from the original on 2013-05-03. Retrieved 2008-06-06.
- ^ "CHLOROACETONE". International Programme on Chemical Safety. Retrieved 2008-06-06.
- ^ Haber, Ludwig Fritz (1986). The Poisonous Cloud: Chemical Warfare in the First World War. Oxford University Press. ISBN 0-19-858142-4.
- ^ Li, Jie-Jack; Corey, E. J. (2004). Name Reactions in Heterocyclic Chemistry. Wiley-Interscience. p. 160. ISBN 978-0-471-30215-5. Retrieved 2009-04-16.
- ^ Hurd, Charles D.; Perletz, Percy (1946). "Aryloxyacetones1". Journal of the American Chemical Society. 68 (1): 38–40. doi:10.1021/ja01205a012. ISSN 0002-7863.
- ^ Phys. Chem. Chem. Phys., 2000,2, 237-245