De Broekmolen, Broeksterwâld

De Broekmolen
De Broekmolen, September 2010
Map
Origin
Mill nameDe Broekmolen
Mill locationNear Schwartzenbergerloane 2, 9108 AL Broeksterwâld
Coordinates53°16′01″N 5°58′15″E / 53.26694°N 5.97083°E / 53.26694; 5.97083
Operator(s)Stichting De Fryske Mole
Year built1876
Information
PurposeDrainage mill
TypeSmock mill
StoreysThree-storey smock
Base storeysSingle-storey base
Smock sidesEight sides
No. of sailsFour sails
Type of sailsCommon sails
WindshaftCast iron
WindingTailpole and winch
Auxiliary powerDiesel engine
Type of pumpArchimedes' screw

De Broekmolen is a smock mill in Broeksterwâld, Friesland, Netherlands which has been restored to working order. The mill is listed as a Rijksmonument, number 11678.[1]

History

[edit]

De Broekmolen was built in 1876 by millwrights Wietse Jurjen en Comp. In 1911, Patent sails were fitted.[2] This work was done by millwright Meindert van der Meulen of Dokkum. A new windshaft was fitted in 1915 at a cost of ƒ600. A new pair of sails were fitted in 1923 at a cost of ƒ565.[3] The sails were fitted with Dekker streamlined leading edges in 1937 by millwright Westra of Franeker. A diesel engine was installed as auxiliary power in 1961 and the Archimedes' screw was renewed. The mill ceased working a few years later. The mill was restored in 1975. Common sails were fitted as part of the restoration.[2] The mill was sold to Stichting De Fryske Mole (English: Frisian Mills Foundation) in 1977.[4] New sails were fitted in 2008.[1]

Description

[edit]

De Broekmolen is a smock mill winded by a winch. There is no stage, the sails reaching almost to the ground. The mill has a single-storey brick base and a three-storey smock. The smock and cap are thatched. The four Common sails have a span of 16.70 metres (54 ft 9 in) and are carried in a cast-iron windshaft. The windshaft also carries the brake wheel which has 44 cogs. This drives the wallower (23 cogs) at the top of the upright shaft. At the bottom of the upright shaft, the crown wheel (34 cogs) drives the steel Archimedes' screw via a gear wheel with 32 cogs. The Archimedes' screw has an axle diameter of 460 millimetres (1 ft 6 in) and is 1.32 metres (4 ft 4 in) diameter overall. It is inclined at an angle of 23°. Each revolution of the screw lifts 439 litres (97 imp gal) of water.[2]

Public access

[edit]

De Broekmolen is open to the public by appointment.[5]

References

[edit]
  1. ^ a b "Technische gegevens" (in Dutch). De Hollandsche Molen. Archived from the original on 8 October 2011. Retrieved 28 August 2009. (Click on "Technische gegevens" to view.)
  2. ^ a b c Stichting De Fryske Mole (1995). Friese Molens (in Dutch). Leeuwarden: Friese Pers Boekerij bv. p. 163. ISBN 90-330-1522-6.
  3. ^ "Broeksterwoude, Friesland" (in Dutch). Molendatabase. Retrieved 28 August 2009.
  4. ^ "Geschiedenis" (in Dutch). De Hollandsche Molen. Archived from the original on 8 October 2011. Retrieved 28 August 2009. (Click on "Geschiedenis" to view.)
  5. ^ "Informatie" (in Dutch). De Hollandsche Molen. Archived from the original on 8 October 2011. Retrieved 28 August 2009. (Click on Informatie to view.)
[edit]