English: This detail of a large crab claw sail in production demonstrates how the sail is constructed with zero camber. The edge of the sail to the right is the foot or bottom of the sail and a pocket was designed into the sail to slot a spar. The edge to the left on most crab claw sails would contain a second spar. In this configuration a bolt rope is used as if it were a spar and the second spar is not needed. The bolt rope runs from the bow to the mast that it is located at the back of the boat. mast-aft Trimaran Hot Buoys designed by Philip Maise
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
You may select the license of your choice.
Captions
Add a one-line explanation of what this file represents
{{Information |Description ={{en|1=This detail of a large crab claw sail in production demonstrates how the sail is constructed with zero camber. The edge of the sail to the right is the foot or bottom of the sail and a pocket was designed into th