LNWR Class G2A

LNWR Class G2A
Class G2A No. 9376 at Crewe, 2 May 1948
Type and origin
Power typeSteam
DesignerCharles Bowen Cooke
Number rebuilt327 (from G1)
Specifications
Configuration:
 • Whyte0-8-0
 • UICD h2
Gauge4 ft 8+12 in (1,435 mm)
Driver dia.4 ft 5+12 in (1.359 m)
Loco weight62 long tons 0 cwt (138,900 lb or 63 t)
Fuel typeCoal
Boiler pressure175 psi (1.21 MPa)
CylindersTwo, inside
Cylinder size20+12 in × 24 in (521 mm × 610 mm)
Valve typeJoy
Performance figures
Tractive effort28,045 lbf (124.8 kN)
Career
OperatorsLNWR » LMS » BR
Power classBR: 7F
NicknamesSuper D

The London and North Western Railway (LNWR) Class G2A was a class of 0-8-0 steam locomotives. They were upgraded from LNWR Class G1 principally by the fitting of a higher pressure boiler. Some of the G2As subsequently received lower pressure boilers on overhaul, taking them back into Class G1.

Numbering

[edit]

On nationalisation in 1948, British Railways (BR) received 320 G2As, thus making them the largest ex-LNWR class received by BR. They were numbered in the range 48893–49394 but the number series is not continuous because some numbers in the same range were given to G1 Class locomotives.[1]

Preservation

[edit]

None were preserved, although a very similar LNWR Class G2 No. 49395 was.

References

[edit]
  1. ^ Ian Allan ABC of British Railways Locomotives, 1948 edition, part 3, pp 39-40

Further reading

[edit]
  • Bob Essery & David Jenkinson An Illustrated Review of LMS Locomotives Vol. 2 Absorbed Pre-Group Classes Western and Central Divisions
  • Edward Talbot, The London & North Western Railway Eight-Coupled Goods Engines
  • Willie Yeadon, Yeadon's Compendium of LNWR Locomotives Vol 2 Goods Tender Engines