Ljungström air preheater
![]() | The topic of this article may not meet Wikipedia's general notability guideline. (February 2018) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/dd/Ljungstr%C3%B6m_regenerative_heat_exchanger.jpg/220px-Ljungstr%C3%B6m_regenerative_heat_exchanger.jpg)
Ljungström air preheater is an air preheater invented by the Swedish engineer Fredrik Ljungström (1875–1964).
![](http://upload.wikimedia.org/wikipedia/en/thumb/f/f2/Ljungstr%C3%B6m_logotype.jpg/220px-Ljungstr%C3%B6m_logotype.jpg)
The patent was achieved in 1930.[1] The factory and workshop were in Lidingö throughout the 1920s, with about 70 employees. In the 1930s, the facilities were used as a film studio, and they were demolished in the 1970s to give space for new development.[citation needed]
In 1995, the Ljungström air preheater was distinguished as the 185th International Historic Mechanical Engineering Landmark by the American Society of Mechanical Engineers.[2] Ljungström's technology of the air preheater is implemented in a vast number of modern power stations around the world, with total attributed worldwide fuel savings estimated at 4,960,000,000 tons of oil, "few inventions have been as successful in saving fuel as the Ljungström Air Preheater".[This quote needs a citation] In modern boilers, the preheater can provide up to 20% of the total heat transfer in the boiler process, while only representing 2% of the investment.[3]
References
[edit]- ^ Regenerative-heat-transmission apparatus, retrieved 2019-04-05
- ^ "The Ljungström Air Preheater 1920". asme.org. American Society of Mechanical Engineers. June 21, 1995. Archived from the original on October 20, 2016. Retrieved February 20, 2018.
- ^ "The Ljungström Air Preheater 1920. An International Historic Mechanical Engineering Landmark" (PDF) (PDF). Svenska Mekanisters Riksförening; American Society of Mechanical Engineers. Archived from the original (PDF) on 2011-07-17. Retrieved 2009-01-10.