Na Hang Dam

Na Hang Dam
Na Hang Dam
	Na Hang Dam
	Location of Na Hang Dam in Vietnam
Official name	Đập Na Hang
Country	Vietnam
Location	Tuyên Quang Province
Coordinates	22°21′36″N 105°23′55″E / 22.36000°N 105.39861°E
Status	Operational
Construction began	2002
Opening date	2008
Dam and spillways
Type of dam	Rock-fill
Impounds	Gâm River
Height	92 m (302 ft)
Length	718 m (2,356 ft)
Reservoir
Total capacity	2.3 cubic kilometres (1,900,000 acre⋅ft)
Power Station
Turbines	3 X 114 MW Francis-type
Installed capacity	342 MW
Annual generation	1,200 GWh

The Na Hang Dam (also known as Tuyên Quang Dam) is a hydroelectric dam on the Gâm River near Pác Tạ Mountain in Tuyên Quang Province, Vietnam.

Construction began on December 22, 2002, and the first unit was commissioned in March 2008 followed by the two other units by end of 2008. The power plant has a capacity of 342 MW (the second largest in the north), and has an energy generating potential of 1,200 GWh per year.^[1] The project's estimated approved cost was US$490 million. The project, as built, has a 92 metres (302 ft) rock fill dam and 718 metres (2,356 ft) long (crest length), called the Na Hang Dam. It has a gross storage capacity of 2.3 billion cubic metres (1,900,000 acre⋅ft) (including 1 billion cubic metres (810,000 acre⋅ft) of flood storage) on the Gâm River.^[2]

Construction of the dam inundated five communes involving about 4,000 households from an area of almost 8,000 hectares. Tay and Dao indigenous peoples were the majority in the Na Hang district when the dam was constructed. There are human rights concerns about missing compensation for relocation, with claims that infrastructure to support resettlement sites as agreed has been neglected by provincial authorities.^[3]

The local government has tried to take advantage of the Na Hang District hydroelectric project for tourism.^[4]