Sound exposure

Sound measurements
Characteristic
Symbols
 Sound pressure p, SPL, LPA
 Particle velocity v, SVL
 Particle displacement δ
 Sound intensity I, SIL
 Sound power P, SWL, LWA
 Sound energy W
 Sound energy density w
 Sound exposure E, SEL
 Acoustic impedance Z
 Audio frequency AF
 Transmission loss TL

Sound exposure is the integral, over time, of squared sound pressure. The SI unit of sound exposure is the pascal squared second (Pa2·s).

Mathematical definition

[edit]

Sound exposure, denoted E, is defined by

where

  • the exposure is being calculated for the time interval between times t0 and t1;
  • p(t) is the sound pressure at time t, usually A-weighted for sound in air.

Sound exposure level

[edit]

Sound exposure level (SEL) is a logarithmic measure of the sound exposure of a sound relative to a reference value.
Sound exposure level, denoted LE and measured in dB, is defined by[1]

where

  • E is the sound exposure;
  • E0 is the reference sound exposure;
  • 1 Np = 1 is the neper;
  • 1 B = 1/2 ln 10 is the bel;
  • 1 dB = 1/20 ln 10 is the decibel.

The commonly used reference sound exposure in air is[2]

The proper notations for sound exposure level using this reference are LW/(400 μPa2⋅s) or LW (re 400 μPa2⋅s), but the notations dB SEL, dB(SEL), dBSEL, or dBSEL are very common, even if they are not accepted by the SI.[3]

References

[edit]
  1. ^ "Letter symbols to be used in electrical technology – Part 3: Logarithmic and related quantities, and their units", IEC 60027-3 Ed. 3.0, International Electrotechnical Commission, 19 July 2002.
  2. ^ Ross Roeser, Michael Valente, Audiology: Diagnosis (Thieme 2007), p. 240.
  3. ^ Thompson, A. and Taylor, B. N. sec 8.7, "Logarithmic quantities and units: level, neper, bel", Guide for the Use of the International System of Units (SI) 2008 Edition, NIST Special Publication 811, 2nd printing (November 2008), SP811 PDF