South African Class Experimental AC
South African Class Experimental AC | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
E1600 at Pyramid South, Pretoria in May 2013 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The South African Railways Class Experimental AC of 1978 is an electric locomotive.
In 1974 and 1975 the South African Railways placed 100 Class 6E1, Series 5 locomotives with a Bo-Bo wheel arrangement in mainline service. In 1978 one was withdrawn from revenue service for use as an experimental 25 kV AC locomotive. It was rebuilt and reclassified to Class Experimental AC.[1]
Manufacturer
[edit]The 3 kV DC Class 6E1, Series 5 electric locomotive was designed and built for the South African Railways by Union Carriage & Wagon (UCW) in Nigel, Transvaal.[2]
Orientation
[edit]These dual cab locomotives have a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end is marked as the no. 2 end. A corridor along the centre of the locomotive connects the cabs.[1]
Test bed for 25 kV AC research
[edit]In 1978, E1600 was withdrawn from revenue service and rebuilt as a test-bed for use during 25 kV AC electrification and reclassified to the sole Class Experimental AC. It was used for testing to detect and eliminate potential problems during the electrification of the four isolated 25 kV networks. These networks are:[1][3][4]
- Pyramid South to Pietersburg and via Rustenburg to Thabazimbi
- Ermelo to Richards Bay
- Port Elizabeth via Noupoort to De Aar and from there northward to Kimberley and southward to Beaufort West
- East London to Springfontein
The unit's single pantograph and its electronic and electric equipment were manufactured by the 50 c/s Group, a consortium consisting of ACEC of Belgium, AEG-Telefunken and Siemens of Germany, Alsthom-Atlantique and Société MTE of France, and Brown Boveri of Switzerland. The same consortium also designed the 25 kV AC Class 7E locomotives which were placed in service on the four 25 kV networks.[3]
The vacuum circuit breaker was supplied by GEC. The original Class 6E1 AEI-283AZ traction motors, manufactured by Associated Electrical Industries, were retained and the locomotive used a thyristor-diode rectifier set for the traction motor DC power supply. Mechanical components were supplied by UCW.[1][3]
Apart from the inscriptions painted on the locomotive sides, the Class Experimental AC locomotive can be visually distinguished from regular Class 6E1 locomotives by the single pantograph on its no. 2 end instead of the usual two pantographs, one on each end, as well as by the large grilles on the sides. The Class 6E1 has two large grilles to the right of centre on each side while no. E1600 has only one such grille on the roof access ladder side and three on the opposite side.[3]
References
[edit]- ^ a b c d South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975
- ^ "UCW – Electric locomotives" (PDF). The UCW Partnership. Archived from the original (PDF) on 12 October 2007. Retrieved 30 September 2010.
- ^ a b c d Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 128–129, 136. ISBN 0869772112.
- ^ Middleton, John N. (2002). Railways of Southern Africa Locomotive Guide - 2002 (as amended by Combined Amendment List 4, January 2009) (2nd, Dec 2002 ed.). Herts, England: Beyer-Garratt Publications. pp. 50–51, 60.
External links
[edit] Media related to South African Class Experimental AC at Wikimedia Commons