Tanzer 10

Tanzer 10
Development
DesignerDick Carter
LocationCanada
Year1980
Builder(s)Tanzer Industries
NameTanzer 10
Boat
CrewTwo
Draft6.67 ft (2.03 m) swing keel down
Hull
TypeMasthead sloop
ConstructionFibreglass
LOA32.67 ft (9.96 m)
LWL27.50 ft (8.38 m)
Beam11.86 ft (3.61 m)
Hull appendages
Keel/board typefixed conventional fin keel or swing keel
Rig

The Tanzer 10 is a Canadian sailboat, that was designed by Dick Carter and first built in 1980.[1][2][3]

The design was later developed into the Tanzer 10.5.[1][3]

Production

[edit]

The boat was built by Tanzer Industries Limited in Dorion, Quebec. The company entered bankruptcy in 1986 and production had ended by then.[1][3][4]

Design

[edit]

The Tanzer 10 is a small recreational keelboat, built predominantly of fibreglass, with wood trim. It has a masthead sloop rig, a transom-hung rudder, wheel steering and a fixed fin keel or optionally a swing keel. The boat displaces 13,000 lb (5,897 kg) and carries 5,000 lb (2,268 kg) of ballast.[1][3]

The boat is powered by a Japanese-made Yanmar diesel engine. It has a pilothouse and inside steering.[1][3]

The fixed keel version has a draft of 5.92 ft (1.80 m), while the swing keel version has a draft of 6.67 ft (2.03 m) with the keel down and 2.00 ft (0.61 m) with the keel retracted.[1][3]

The design has a hull speed of 7.03 kn (13.02 km/h).[3]

See also

[edit]

Similar sailboats

References

[edit]
  1. ^ a b c d e f Browning, Randy (2016). "Tanzer 10 sailboat specifications and details". sailboatdata.com. Archived from the original on 2 March 2022. Retrieved 10 July 2016.
  2. ^ McArthur, Bruce (2022). "Dick Carter". sailboatdata.com. Archived from the original on 2 March 2022. Retrieved 2 March 2022.
  3. ^ a b c d e f g Sea Time Tech, LLC (2022). "Tanzer 10". sailboat.guide. Archived from the original on 2 March 2022. Retrieved 2 March 2022.
  4. ^ McArthur, Bruce (2022). "Tanzer Industries Ltd. 1966 - 1986". sailboatdata.com. Archived from the original on 8 September 2020. Retrieved 28 February 2022.