Turbomeca TM 333

TM 333
Type Turboshaft
National origin France
Manufacturer Turbomeca
First run 1981
Major applications HAL Dhruv

The Turbomeca TM 333 is a turboshaft engine manufactured by French company Turbomeca and designed for helicopters weighing 4-5 tonnes.[1] It first ran in August 1981 and was introduced commercially in the mid-1980s.[1] It was the first Turbomeca engine to use a single stage turbine, making it more compact than its predecessors.[1] In its original design, the engine was rated at 750 continuous horsepower, though it was designed to allow for future power increases,[1] and the later 2B2 variant made 1,100 horsepower.[2]

Variants

[edit]
TM 333 2B2
The TM 333 2B2 powered early versions of the HAL Dhruv, though it was replaced by the Shakti engine, which was jointly developed by HAL and Turbomeca.[2]
TM 333 2M2
The TM333 2M2 is used on the HAL Cheetal and Chetan, upgraded versions of the Cheetah and Chetak, respectively.[3]

Applications

[edit]

Specifications (TM 333 2M2)

[edit]

Data from EASA TCDS E.030 TM333 Series Issue 05 [4]

General characteristics

  • Type: Twin-spool turboshaft
  • Length: 1,045 mm (41.1 in)
  • Diameter: 454 mm (17.9 in) (width), 745 mm (29.3 in) (height)
  • Dry weight: 162.5 kg (358.3 lb)

Components

  • Compressor: Two-stage axial, single-stage centrifugal
  • Combustors: Annular,reverse flow
  • Turbine: Single-stage compressor turbine, single-stage power turbine

Performance

  • Maximum power output: 736 kW (987 shp) (maximum continuous)

See also

[edit]

Related lists

References

[edit]
  1. ^ a b c d "TM.333; a new generation turboshaft" (PDF). Flight International. 1 January 1983.
  2. ^ a b "Military engines: Local power". Flightglobal. 1 May 2007. Retrieved 13 April 2017.
  3. ^ "Gaining altitude". Flightglobal. 21 February 2006. Retrieved 13 April 2017.
  4. ^ EASA E.030 www.easa.europa.eu - Retrieved: 7 December 2021
[edit]